Swallow Yachts Forum > Home Builders' Area

Any Storm 17 Kits still under construction out there?

(1/2) > >>

Chris Capener:
Hi ,

I have left my Storm 17 half built in the UK while I have been away working in Malaysia for the last three years, I am hoping to get back next summer to finish the job, just wondering any other kits still out there waiting to be finished?

Regards

Chris

Edwin Davies 2:
Is it one of those with water ballast?  It really does work well.

Chris Capener:
Hi Edwin,

No it isn't a kit with specific provision for water ballast, I have read a few posts on this and it seems to be a question of speed versus stability.  DO you have a Storm 17 with water ballast? How is the water ballast achieved, any tricky modifications?

Regards
Chris

Edwin Davies 2:
I don't have the build instructions as the boat was built by Steve Jones.  I get water in by undoing a screw bung in the skin. Access is through a round hatch.  To empty I can undo two screw bungs to let the water drain into a well in the floor it can then be pumped out of the boat.
I will do some measuring and photography when the cover comes off next.  I have just painted the inside of the boat.  There are two air vents at the bow end to ensure the water can fill properly.

If you search the forum for S17 water ballast you will find a post of mine showing the change in water line with ballast in and out.  Very obvious at the bilge runner level.

Chris Capener:
Hi Edwin - thanks for the info and for pointing me to the previous posts :)

Look forward to seeing your photos

Regards


Chris

Navigation

[0] Message Index

[#] Next page