Author Topic: Running rigging diagram for bay cruiser 26  (Read 566 times)

0 Members and 1 Guest are viewing this topic.

DJK

  • Jr. Member
  • **
  • Posts: 4
Running rigging diagram for bay cruiser 26
« on: 01 May 2024, 19:20 »
Looking for drawing or diagram for running rigging for bay cruiser 26

Nick Orchard

  • Full Member
  • ***
  • Posts: 80
Re: Running rigging diagram for bay cruiser 26
« Reply #1 on: 03 May 2024, 16:00 »
Hi - I haven't seen a published BC26 running rigging diagram, apart from the inside of the boom,  although I presume that Matt has something. I think most of it is fairly straightforward, but is there something specific that you need help with?
Nick Orchard
BC26 008 Luminos II - Torquay

DJK

  • Jr. Member
  • **
  • Posts: 4
Re: Running rigging diagram for bay cruiser 26
« Reply #2 on: 03 May 2024, 18:27 »
Hi Nick thanks for reply just put up mast and boom and had a chat with Matt which explained most things have yet too connect reefing lines. Perplexed as too what a white Velcro ring around the boom, near main clew is for. Have not found a cicking strap yet so more fun to come.

Sea Simon

  • Hero Member
  • *****
  • Posts: 729
Re: Running rigging diagram for bay cruiser 26
« Reply #3 on: 03 May 2024, 18:54 »
Velcro strap is a main clew hold down. It's  intended to allow the main clew to slide lengthways along the boom, as Sail is flattened by outhaul or reefs. While keeping clew snug to the boom.
Common nowadays on many boats from Lasers upwards.
My BC 26 has one.
It needs to be snug, but not too tight...rig around boom, thru clew ring.

You will need a kicker, and a cunningham  too.
My kicker now at 12.1, so as to allow one handed operation, no winching.
Not sure about outhaul purchases, but mine needs a winch in heavy winds

Dig about on here for photos of other boats setups?

BTW...welcome!
Which BC 26 are we talking about?  New? Used?
BRe # 52 - "Two Sisters"  2016. Plank sprit, conventional jib. Asym spinn. Coppercoat. Honda 5. SOLD Nov 2022....
...From Oct 22.
BC 26 #1001. "Two Sisters 2", 2013. Alloy spars, Bermudan Sloop; fixed twin spade rudders, Beta diesel saildrive. Lift keel with lead bulb. Coppercoat. Cornwall UK.

Nick Orchard

  • Full Member
  • ***
  • Posts: 80
Re: Running rigging diagram for bay cruiser 26
« Reply #4 on: 03 May 2024, 21:47 »
Hi DJK - I'll PM you regarding some pdf's that I've got that may help.
Nick Orchard
BC26 008 Luminos II - Torquay

DJK

  • Jr. Member
  • **
  • Posts: 4
Re: Running rigging diagram for bay cruiser 26
« Reply #5 on: 07 May 2024, 17:49 »
Thanks for replies just bought Pardela BC26 approx 7 years old, and selling a hunter liberty 22. BC Just failed boat Saftey test on several small electrical issues and gas locker should find out what issue is with locker soon
Cheers

AndyB

  • Full Member
  • ***
  • Posts: 72
Re: Running rigging diagram for bay cruiser 26
« Reply #6 on: 11 May 2024, 20:04 »
Welcome to the band of BC26 owners. 

I also had a Liberty 22 ( Rubato) - the very first one and kept it for around 20 years, also run their website. The BC26 is a step up and completely different - has more room, is bigger and faster. I have had mine for 2 years now but still sometimes yearn after the 22 with its simplicity. But then I remember the long journeys up Southampton water which is so much quicker in the BC26.

I would be very interested in hearing on your thoughts about moving. Where are you sailing?

Best regards
Andy.
Andy
Baycruiser 26 BagPuss